The UPS MINI-BLASTER – ‘Rustibus 25 Series’, is a lightweight hand tool designed to provide a ‘Grit Blasted’ profile, without the use of grit!
The prepared surface can then accept the UPS Range of Metal Repair, Ceramic Linings, Elastomer (Rubber) Repairs, Emergency & Composite Pipe Repair Systems and much more…
The UPS MINI-BLASTER is ideal for spot scaling (horizontal and vertical), along welds, around flanges and have proven to be very efficient for ballast tank maintenance. They are also ideal for creating a feathered edge on overlap areas of paint.
The UPS MINI-BLASTE is designed to achieve a profile surface of approximately 50 microns (2mils) with a surface cleanliness of ST 3+++.
Handy size scaling machine for small horizontal and vertical areas
Perfect for damage sensitive areas; For Example Paint removal from bolt threads on flanges
High quality construction and ergonomic designed
With proper use can obtain near ‘Grit Blasted’ profiles
Able to obtain ST3+++ (SSPC-SP11 +++) without damaging the steel!
Has a selection of consumables available for different surfaces & jobs
Delivered ready for use
Minimal Surface Preparation
Touch Dry 1 – 2 hours
Brush or Roller Application
1-2 hours @ 20°C (68°F)
Direct Pull off Adhesion
28KG/cm² (400 psi)
Minimum Overcoating Window
3-4 hours @ 20°C (68°F)
42KG/cm² (600 psi)
20 LTR (5.3 US Gallon) of fully mixed material will give the following coverage rates -
20m² at 1000 microns 215ft² at 40mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Resistant to dry heat up to 120°C (248°F) dependent on load