UPS 360 RRP RUBBER REPAIR PASTE 60 is a high-performance paste grade elastomer which has been specially developed for on-site repairs to damaged conveyor belts.
This specially developed flexible multi-purpose polyurethane elastomer can also be used to repair, rebuild and coat rubber components and metal surfaces.
UPS 360 RRP is a solvent free material that has outstanding adhesion properties to rubber surfaces, easy to mix and apply and will cure at ambient temperatures which in turn eliminates the need for hot work.
Outstanding application characteristics –
No special tools required
The use of a primer isn’t required but does improve adhesion
Seamless application making it ideal for conveyor belt repairs
Excellent abrasion resistance
Outstanding elongation – up to 270% at break
Provides excellent cold vulcanizing capabilities
Designed for application by trowel or spatula at thicknesses up to 6mm (237mil) without slumping
Good chemical resistance to a wide range of industrial chemicals
Solvent free material – reducing Health & Safety concerns
Formally known as TR 305 / Flexi-Tech 60 EG / 60 EG 533
Applications for UPS 360 RRP RUBBER REPAIR PASTE 60 include:
Repair tears, splits, cracks etc., in rubber components such as conveyor belts
Repair off-road tyres
Mould and reform gasket seals and rubber rollers
Repair holes and cracks on pump diaphragms
Used to seal leaks on rubber pipe work –
Floating hoses
Used to create new and repair old expansion joints
Surface Preparation Manual | Mechanical
Useable Life
5–7 minutes
Excellent Cold
Vulcanizing Capabilities
Trowel or Spatula
Application
Hardness Shore A
0 – 62 (24 hour cure)
65 – 70 (7 day cure)
Elongation at Break
(DIN 53504)
260 – 270%
Gel Time
10 minutes @ 20°C (68°F)
Tensile Strength
(DIN 53504)
3-4 Mpa
Useable Life
5 - 7mins @ 20°C (68°F)
Pack Sizes
100GMS (0.22LB)
500GMS (1.1LB)
1KG (2.2LB) of fully mixed product will give the following coverage rates -
0.6m² at 1mm 4.46ft² at 40mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Operating temperatures between 80 – 90°C (176 – 194°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300