UPS 519 HD HEAVY DUTY CERAMIC has been specially developed to resurface equipment subject to medium sliding abrasion.
Once cured UPS 519 HD will resist deformation damaged and wear proving long-term abrasion resistance. It will not corrode and is highly resistant to a wide range of industrial chemicals.
Where equipment is subject to sever abrasion, UPS 241 HDX HEAVY DUTY CERAMIC X has been developed.
Excellent adhesion to correctly prepared metal surfaces
Ideal for fluid with high solids content
Will not corrode
High mechanical strength
Long working life
Solvent free epoxy repair composite which contains 0.2 – 1.5mm hardened ceramic beads
Designed for application by trowel or spatula at thickness up to 6mm (240mil)
Solvent free allowing for application in confined spaces
No hot work required – Application and cure at ambient temperature
Formally known as TR 240 / Cerami-Tech HG / HG 519
Applications for UPS 519 HD HEAVY DUTY CERAMIC include:
Chutes
Pipe bends
Hoppers
Pump casings, etc., which are subject to high abrasive wear
Surface Preparation Mechanical | Abrasive Blast
Useable Life 50 minutes
Hydrocarbon Immersion to 50°C (112°F)
Cost Effect Solution
Corrosion Resistance
(ASTM B117)
Minimum 1,000 hours
Compressive Strength
(ASTM D695)
990KG/cm² (13,985 psi)
Colours Available
Grey | Red
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
148KG/cm² (2,100 psi)
Useable Life
50 mins @ 20°C (68°F)
Pack Sizes
1.5KG (3.3LB) | 5KG (11LB)
5KG (11LB) of fully mixed product will give the following coverage rates -
1.46m² at 2mm 15.70ft² at 80mil
0.73m² at 4mm 7.848ft² at 160mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Full immersion Resistance
Tested water / hydrocarbon immersion to 50°C (122°F)
Pass (No blisters)
Dry Heat Resistance
Tested to ASTM D2485
Pass 120°C (248°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
