UPS 241 HDX HEAVY DUTY CERAMIC X has been specially developed to resurface equipment subject to sever abrasion.
Once cured UPS 241 HDX will resist deformation damaged and wear proving long-term abrasion resistance. It will not corrode and is highly resistant to a wide range of industrial chemicals.
Excellent adhesion to correctly prepared metal surfaces
Ideal for fluid with high solids content
Will not corrode
High mechanical strength
Long working life
Designed for application by trowel or spatula at thickness up to 6mm (240mil)
Solvent free allowing for application in confined spaces
No hot work required – Application and cure at ambient temperature
Applications for UPS 241 HDX HEAVY DUTY CERAMIC X include:
Chutes
Pipe bends
Hoppers
Pump casings
Useable Life 30 minutes
Cost Effective Solution
Wet Heat Resistance up to 60°C (140°F)
Surface Preparation Mechanical | Abrasive Blast
Corrosion Resistance
(ASTM B117)
Minimum 1,000 hours
Compressive Strength
(ASTM D695)
1,046KG/cm² (14,880 psi)
Colours Available
Grey
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
272KG/cm² (3,840 psi)
Useable Life
30 minutes @ 20°C (68°F)
Pack Sizes
1.5KG (3.3LB) | 5KG (11LB)
1.5KG (3.3LB) of fully mixed product will give the following coverage rates
0.73m² at 3mm 7.848ft² at 120 mil
0.220m² at 10mm 3.978ft² at ¼”
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Full immersion resistance;
Tested water / hydrocarbon immersion to 60°C (140°F)
Pass (No blisters)
Dry Heat resistance;
tested to ASTM D2485
Pass 150°C (302°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300