UPS 364 RRP RUBBER REPAIR PASTE - FAST SET is a high-performance paste grade elastomer which has been specially developed for on-site repairs to damaged conveyor belts.
The material shares all the same properties with UPS 360 RRP with the added element of a very fast setting time.
This specially developed flexible multi-purpose polyurethane elastomer can also be used to repair, rebuild and coat rubber components and metal surfaces.
UPS 364 RRP-FS is a solvent free material that has outstanding adhesion properties to rubber surfaces, easy to mix and apply and will cure at ambient temperatures which in turn eliminates the need for hot work.
Outstanding application characteristics -
No special tools required
The use of a primer isn’t required but does improve adhesion
Seamless application making it ideal for conveyor belt repairs
Excellent abrasion resistance
Fast setting material
Provides excellent cold vulcanizing capabilities
Designed for application by trowel or spatula at thicknesses up to 6mm (237mil) without slumping
Good chemical resistance to a wide range of industrial chemicals
Solvent free material – reducing Health & Safety concerns
Formally known as TR 310 / Flexi-Tech 60 RG / 60 RG 537
Applications for UPS 365 RRP RUBBER REPAIR PASTE - FAST SET include:
Repair tears, splits, cracks etc., in rubber components such as conveyor belts
Repair off-road tyres
Mould and reform gasket seals and rubber rollers
Repair holes and cracks on pump diaphragms
Used to seal leaks on rubber pipe work –
Floating hoses
Used to create new and repair old expansion joints
Surface Preparation Manual | Mechanical
Useable Life
4 - 5 minutes
Excellent Cold Vulcanizing Capabilities
Trowel or Spatula
Applied
Hardness Shore A
60 – 62 (24-hour cure)
65 – 70 (7-day cure)
Elongation at Break
(DIN 53504)
260 – 270%
Gel Time
6 minutes @ 20°C (68°F)
Tensile Strength
(DIN 53504)
3-4 Mpa
Useable Life
4 – 5 minutes @ 20°C (68°F)
Pack Sizes
100GMS (0.22LB) | 500GMS (1.1LB)
1KG (2.2LB) of fully mixed product will give the following coverage rates -
0.6m² at 1mm
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Operating temperatures between 80–90°c (176–194°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300