UPS 19060 SG

Thistlebond stick grade metal
IMPA 81 22 02
REQUEST A QUOTE
UPS - TOOL ICON

UPS 19060 SG ThistleBond Stick Grade Metal

UPS 19060 SG THISTLEBOND STICK GRADE METAL is a specially packaged rapid curing synthetic metal repair compound for on-site repairs to metal components such as leaking pipes, tanks, ducts, radiators, etc.,

PRODUCT FEATURES & BENEFITS

Simple to use; only requiring simple hand mixing to activate reaction between the concentrically packed components

Designed for rapid repairs to cracked casting, leaking pipes, tanks, flanges, etc., minimizing downtime

Can be applied to any damaged metal surface, plus glass, fiberglass and other composite surfaces

Rapid curing – Hard dry in 30 minutes.

High mechanical strength in a short period of time

Non-rusting steel reinforced epoxy putty

Designed for application by gloved hand, putty knife or spatula

Exhibits excellent adhesion to correctly prepared metal surfaces

WRAS & NSF61 Approved for potable water applications

Formally known as TRK 19060 / Metal-Tech SG / SG 527

PRODUCT APPLICATIONS

Applications for UPS 19060 SG THISTLEBOND STICK GRADE METAL include:

Cracked pump or valve casings

Worn bearing housings

Damaged flanges

Leaking tank seams

Worn or damaged pump shafts

Cracked engine blocks

Worn keyways

Scored hydraulic rams

UPS - TOOL ICON

No Specialist Tools Required

UPS - TOOL ICON

60 Minutes to Full Cure

UPS - TOOL ICON

Wet Heat Resistance up to 140°C (284°F)

UPS - TOOL ICON

Cost Effect Solution

KEY TECHNICAL INFORMATION

Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
185KG/cm² (2,630 psi)

Compressive Strength
(ASTM D695)
843KG/cm² (12,000 psi)

    Useable Life
5 mins @ 20°C (68°F)

Pull off Adhesion
(ASTM D4541 Abrasive Blasted Mild Steel with 75 microns Profile)
125KG/cm² (1,780 psi)

Hardness Rockwell R
(ASTM D785)
92

Pack Sizes
125GM Stick

HEAT RESISTANCE

Suitable for long-term water immersion at temperatures up to 140°C (284°F)

Resistant to dry heat in excess of 130°C (266°F) dependent on load

CHEMICAL RESISTANCE

The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media

If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice

Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300

OFFICIAL APPROVALS

UPS - BV LOGO
UPS - IMPA ICON
UPS - THISTLEBOND LOGO
UPS - WRAS LOGO

USDA Compliant for incidental food contact

Badly damaged Bolt holes due to repaired with UPS 19060 SG. Using the existing bolts and a release agent new threads can be cast.

DOWNLOADABLE CONTENT

If you are interested in this product or need technical assistance choosing the correct product for your application –
Please contact Unique Polymer Systems

MESSAGE US

Contact us using WhatsApp