UPS 205 FG FLUID GRADE CERAMIC is a high-performance fluid grade epoxy ceramic which provides outstanding long-term protection from erosion and corrosion of metal surfaces in aggressive fluid flow environments.
Designed for application by stiff brush or squeegee
Primary designed for resurfacing metal components used in fluid flow environments
High compressive strength
Solvent free material – Reducing Health & Safety concerns
No shrinkage, distortion or expansion
Excellent adhesion to correctly prepare metal surfaces
Provides outstanding resistance to impingement, entrainment and erosion and corrosion
Excellent chemical resistance to a wide range of industrial chemicals
No hot work required – Application and cure at ambient temperature
Formally known as TR 205 / Cerami-Tech FG / FG 512
Applications for UPS 205 FG FLUID GRADE CERAMIC include:
Impellers
Propellers
Separator housings
Pipes
Pump casings
Valves
Kort nozzles and rudders
Water boxes
Brush or Applicator Tool Applied
6 hours to Machining
Dry Heat Resistance in Excess of 200°C (392°F)
Surface Preparation
Mechanical | Abrasive Blast
Compressive Strength
(ASTM D695)
960KG/cm² (13,650 psi)
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Colours Available
Light Grey, Dark Grey, Blue & Red
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
202KG/cm² (2,875 psi)
Useable Life
20 – 30 minutes @ 20°C (68°F)
Pack Sizes
1KG (2.2LB) | 3KG (6.6LB)
1KG (2.2LB) of fully mixed material will give the following coverage rates -
1.78m² at 250 microns 19ft² at 10 mil
1.485m² at 300 microns 16ft² at 12 mil
1.28m² at 350 microns 14ft² at 14 mil
Where the maximum over coating time is exceeded, the material should be allowed to harden before being abraded or flash blasted to remove surface contamination
Suitable for long-term water immersion at temperatures up to 70°C (158°F)
Resistant to dry heat in excess of 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
USDA Compliant for incidental food contact