UPS 110 FG FLUID GRADE METAL is a high-performance synthetic metal repair compound specially developed for resurfacing and reforming damaged metal machinery and equipment.
When used in conjunction with UPS Aggregates a grip system can be achieve on metallic surfaces making it ideal for walkways, equipment and drive rollers.
Designed for application by stiff brush or squeegee
Exhibits excellent adhesion to correctly prepared metal surfaces
High compressive strength
Excellent wear and chemical resistance
Primarily designed for resurfacing and recasting metal components
Provides outstanding slip-resistance properties when used in conjunction with UPS Aggregates
Solvent free material – reducing Health & Safety concerns
Formally known as TR 110 / Metal-Tech FG / FG 502
Applications for UPS 110 FG FLUID GRADE METAL include:
Resurfacing damaged and worn pump casings
Valve bodies
Worn bearing housings
Damaged flanges
Surface Preparation
Manual | Mechanical | Abrasive Blast
Machining in
just 2 hours
Wet Heat Resistance up to 60°C (140°F)
Cost Effect
Solution
Compressive Strength
(ASTM D695)
1,075KG/cm² (15,300 psi)
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Machining & Light Loading
2 hours @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 micron profile)
185KG/cm² (2,630 psi)
Useable Life
30 mins @ 20°C (68°F)
Pack Sizes
1KG (2.2LB) | 3KG (6.6LB)
1KG (2.2LB) of fully mixed material will give the following coverage rates -
0.440m² at 1mm 4.73ft² at 40mil
0.220m² at 2mm 2.37ft² at 80mil
0.146m² at 3mm 1.57ft² at 1/8”
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 70°C (158°F)
Intermittent contact with pressured steam up to 120°C (248°F)
Resistant to dry heat in excess of 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
