UPS 405 EPC-AG EPOXY PROTECTIVE COATING - ABRASION GRADE is a high build solvent free epoxy coating designed for the long-term protection of steel and concrete structures against chemical attacked, wear and abrasion.
UPS 405 EPC-AG is a modified version of the standard UPS 405 EPC which has been loaded with hardened ceramic particles to provide outstanding abrasion resistance.
This two-part epoxy coating provides outstanding chemical resistance and protects equipment operating in a wide range of industrial chemicals.
It has outstanding adhesion to manually prepared surfaces making it ideal for difficult applications.
UPS 405 EPC-AG can be brush, roller or standard airless spray applied making it one of the most versatile products.
Contains hardened ceramic particles which provide outstanding abrasion and wear resistance
Reduces downtime and eliminates the need for replacement
Solvent free epoxy – Reducing Health & Safety concerns
Once cured the material provides high abrasion and impact resistance making it ideal for protection against high solid content– chemicals / fluids
Excellent resistance to abrasion and mechanicaldamage
Outstanding chemical resistance to a wide range of industrial chemicals oils and marine structures
Can be applied by brush, roller and airless spray
No hot work required during application
Applications for UPS 405 EPC-AG EPOXY PROTECTIVE COATING - ABRASION GRADE include:
Pipelines and tank internals
Sheet and bearing piles protection
Chemical pits, channels etc.,
Structural steel protection
Chutes & Separators
Tank lining system
Chemical intake areas
Bunds, sumps, secondary containment areas
Protect all types of equipment operating under immersion conditions from corrosion
Turbine housings & blades
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush Applied or Airless Spray Applied
Roller Applied
Wet Heat Resistance up to 60°C (120°F)
Useable Life
45 mins @ 20°C (68°F)
Water / Sea Water Immersion
4 days @ 20°C (68°F)
Flexural Strength
ASTM D790
518KG/cm² (7,350 psi)
Available Colours
Light Grey | Black
Minimum Over-Coating Window
8 hours @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile)
190KG/cm² (2,700 psi)
Immersion Testing
(ISO 2182-2 50°C )
No blistering or corrosion after 6 months
Pack Sizes
3.6LTR (0.9US Gallon) | 17LTR (4.5 US Gallon)
3.6LTR (0.8 US Gallon) of fully mixed product will give the following coverage rates -
9m² at 400 microns 96ft² at 16mil
17LTR (4.2 US Gallon) of fully mixed product will give the following coverage rates -
42.5m² at 400 microns 457ft² at 16mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperatures up to 60°C (120°F) dependent on chemical contact
Dry conditions up to 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.
Chemical
(1) Sulphuric Acid
(2) Hydrochloric Acid
(3) Phosphoric Acid
(4) Sodium Hydroxide
(5) Black Liquor
(6) Crude Oil
(7) Diesel
(8) Hydrocarbons
(9) Sea Water
(10) White Liquor
Concentration
(1) 20%
(2) 20%
(3) 30%
(4) 50%
(5) -
(6) -
(7) -
(8) -
(9) -
(10) -
Temperature
(1) 40°C (104°F)
(2) 40°C (104°F)
(3) 40°C (104°F)
(4) 40°C (104°F)
(5) 40°C (104°F)
(6) 30°C (86°F)
(7) 40°C (104°F)
(8) 30°C (86°F)
(9) 40°C (104°F)
(10) 40°C (104°F)
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice.
Email: sales@uniquepolymersystems.com or call +44(0) 1531 636 300