UPS 913 S SEALER is a water based acrylic emulsion, for use sealing concrete and cementitious surfaces. The low viscosity fluid penetrates deep into the surface making it ideal for dustproofing and sealing concrete surfaces.
Single component product
Low odour – Slight sheen when cured on concrete substrates
Water based – Simple & easy to apply
Formally known as BS 848
Applications for UPS 913 S SEALER include:
Porous concrete and cementitious surfaces
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush or Roller Applied
Touch Dry 2 hours
Water Based Acrylic Emulsion
Minimum Over-Coating Window
2 hours @ 20°C (68°F)
Maximum Over-Coating Window
72 hours @ 20°C (68°F)
Available Colours
White
Touch Dry
2 hours @ 20°C (68°F)
Pack Sizes
5LTR | 20LTR
5 LTR (1.3 US Gallon) of fully mixed material will give the following coverage rates -
50m² at 100 microns
536ft² at 4mil
20 LTR (5.3 US Gallon) of fully mixed material will give the following coverage rates -
200m² at 100 microns
2146ft² at 4mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired