UPS 17000 LBRK

Thistlebond Lifeboat repair KiT
Impa 33 02 87
REQUEST A QUOTE

UPS 17000 LBRK THISTLEBOND LIFEBOAT REPAIR KIT

UPS 17000 LBRK THISTLEBOND LIFEBOAT REPAIR KIT contains high performance, low viscosity, 100% solids materials designed for use as a resin repairs for polyester laminated hulls of lifeboats and life rafts.

The material is easy to use and because of its adhesion properties it can also be used to effectively repair metals, wood, glass and synthetic materials.

The materials are supplied as a kit contained in special watertight packaging to meet accepted marine industry standards.

PRODUCT FEATURES & BENEFITS

Full range of accessories supplied in kit

Excellent adhesion & penetration properties

Contains 100% solids Resin & Hardener

100% solids coating

Excellent over coating properties

For use out of water

Supplied in water tight container

PRODUCT APPLICATIONS

Applications for UPS 17000 LBRK THISTLEBOND LIFEBOAT REPAIR KIT include:

Ideal for repairing cracks or holed GRP hulls & structures effectively

MHSP - Home icon

Surface Preparation Manual – Mechanical – Abrasive Blast

MHSP - Home icon

2 hours to
Machining

MHSP - money icon

Wet Heat Resistance up to 70°C (158°F)

MHSP - location  icon

Cost Effect Solution

KEY TECHNICAL INFORMATION

Compressive Strength
(ASTM D695)
1,075KG/cm² (15,300 psi)

Useable Life
30 mins @ 20°C (68°F)

Corrosion Resistance
(ASTM B117)
Minimum 5,000 hrs

Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile) 185KG/cm² (2,630 psi)

Machining & Light Loading
2 hrs @ 20°C (68°F)

Pack Sizes
1KG (2.2LB), 3KG (6.6LB)

COVERAGE RATES

1KG (2.2LB) of fully mixed product will give the following coverage rates -

0.388m² at 1mm / 4.3ft² at 40mil

Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired

HEAT RESISTANCE

Suitable for long-term water immersion at temperatures up to 70°C (158°F)

Intermittent contact with pressured steam up to 120°C (248°F)

Resistant to dry heat in excess of 200°C (392°F) dependent on load

CHEMICAL RESISTANCE

The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.

Refer to the Unique Polymer Systems Technical Centre for advice.

Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300

OFFICIAL APPROVALS

MHSP - location  icon
MHSP - location  icon
MHSP - location  icon

DOWNLOADABLE CONTENT

If you are interested in this product or need technical assistance choosing the correct product for your application –
Please contact Unique Polymer Systems

MESSAGE US

Contact us using WhatsApp