UPS 19000 RH THISTLEBOND STANDARD RESIN & HARDENER is a high performance, solvent free epoxy system designed for onsite repairs to metal, wood, glass and synthetic materials.
The mixed RESIN & HARDENER can be applied to manually prepared surfaces to create a GRP layer around the entire circumference of leaking or corroded pipe surfaces (UPS Composite Wrapping). By incorporating layers of high strength woven glass fibre (UPS 19007/9 GT) the pipe repair system is proven to give 10 years+ protection to damaged, leaking, porous or corroded pipe surfaces.
Ideal for use with technical fabrics
Unaffected by short-term contact with industrial chemicals
No shrinkage
Excellent adhesion manually, mechanically and abrasive blast cleaned surfaces
Thixotropic consistency for overhead repairs
Can repair pipes up to 36” diameter
Outstanding corrosion resistance
Formally known as TRK 19000
This material is ideal for sealing and encapsulating;
Porous and leaking pipe surfaces
Sealing leaking tank seams
Injection into voids and cracks from 1 to 20mm (40 to 788mil)
Encapsulating long lengths of large diameter pipework
Sealing leaking flanges fittings
Bonding dissimilar materials
Surface Preparation Manual | Mechanical | Abrasive Blast
Multiple Application Methods
Light Loading 16 Hours
Excellent Adhesion Even Under Seawater Immersion Conditions
Useable Life
25 minutes @ 20°C (68°F)
Corrosion Resistance
(ASTM B117)
Minimum 5000 hours
Flexural Strength
(ASTM D790)
912KG/cm² (13,000 psi)
Pack Sizes
225GM (0.49LB) | 6KG (13.2LB)
Movement Without Load or Immersion
2 hours @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002)
(Abrasive Blasted Mild Steel with 75-micron profile)
148KG/cm² (2,100 psi)
Compressive Strength
(ASTM D695)
1,034KG/cm² (14,700 psi)
225GM (0.5LB) of fully mixed product will give the following coverage rates -
0.50m² at 500 microns 5.3ft² at 20mil
0.25m² at 1mm 2.7ft² at 40mil
Dry Heat 100°C (212°F)
Sealer Filler Resin Mix 180°C (356°F)
In Conjunction with Glass Tape 170°C (338°F)
Low Pressure Repair - 35KG/cm² (500 psi)
High Pressure Repair - 112KG/cm² (1,600 psi)
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300