UPS 402 ENHT Epoxy High Temperature is a high build solvent-free epoxy novolac coating. Designed to provide outstanding abrasion and chemical protection of steel and concrete structures at elevated temperatures.
The coating contains hardened ceramic particles making it ideal for highly abrasive environments with strong industrial chemicals and acids.
Can be applied by brush, roller and airless spray
Excellent abrasion resistance
100% solids high performance epoxy novolac
Resistant to high acidic slurries at elevated temperatures.
UPS 402 ENHT is suitable for use on;
Chemical drains and channels
Internal pipe surfaces
Pumps and valves etc.,
Apply by Airless spray
Apply by Roller
Apply by Brush
Immersed temperature resistance up to 90°C (194°F).
Useable Life – 45 mins @ 20°C (68°F)
Water / Sea Water Immersion – 4 days @ 20°C (68°F)
Compressive Strength (ASTM D695) – 790kg/cm2 (11,235psi)
Pack Sizes – 4LTR, 16LTR
Minimum Over-Coating Window – 8 hours @ 20°C (68°F)
Tensile Shear Adhesion (ASTM D1002) – 196kg/cm2 (2,790psi)
Flexural Strength (ASTM D790) – 820kg/cm2 (11,600psi)
Available Colours – Dark Grey, Red
4 LTR (1.05 US Gallon) of fully mixed material will give the following coverage rates -
8m2 at 500 microns 85ft2 at 20 mil
16 LTR (4.2 US Gallon) of fully mixed material will give the following coverage rates -
32m2 at 500 microns 343ft2 at 20mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperatures up to 90°C (194°F).
Resistant to dry heat up to 200°C (392°F) dependent on load.
Resistant to dry heat in excess of 200°C (392°F) dependent on load.