UPS 784 WC-AC WALL COAT ANTI-CARBONATION is a single component water based acrylic coating designed to give a flexible, UV stable, weatherproof finish to external surfaces.
The product is supplied ready to use and can be applied to concrete, palter, brick & asbestos cement
UV stable membrane
Single component
Seamless & flexible waterproofing system
Applications for UPS 784 WC-AC WALL COAT ANTI-CARBONATION include:
Protection of external surfaces such as concrete, plaster, render, brick, asbestos cement boards
Minimal Surface Preparation
UV Stable
Airless Spray Applied
Brush or Roller Applied
Touch Dry
1-2 hours @ 20°C (68°F)
Direct Pull off Adhesion
(ASTM D4541)
28KG/cm² (400 psi)
Elongation
(ASTM D412)
120%
Mould Resistance
Excellent
Available Colours
White
Minimum Overcoating Window
3-4 hours @ 20°C (68°F)
Water Vapour Permeability
(ASTM D1653)
2 x 104 perm.cm
Humidity Resistance
(ASTM BS3900)
5000 hours unaffected
Bacteria Resistance
Excellent
Pack Sizes
20LTR
20 LTR (5.3 US Gallon) of fully mixed material will give the following coverage rates -
66.6m² at 300 microns 715ft² at 12mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Resistant to dry heat up to 100°C (212°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
Refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300