UPS 250 UWC UNDER WATER CERAMIC has been designed for application to wet surfaces or underwater. The product provides high level adhesion to wet surfaces and long-term protection of steel and concrete structures against corrosion, abrasion and chemical attack.
Outstanding resistance to a wide range of chemicals and operating environments
Provides long-term protection against corrosion, erosion, abrasion and chemical attack
Designed for application by brush or applicator tool
Ideal for offshore applications
Will cure in wet conditions and underwater
Formally known as UW 151 E / Chemi-Tech UW
Applications for UPS 250 UWC UNDER WATER CERAMIC include:
Subsea structures
Sheet and bearing piles
Splash zones
Risers
Pipelines
And other land and marine structures
Surface Preparation Manual | Mechanical | Abrasive Blast
Multiple Application Methods
Light Loading 18 Hours
Provides High Level Adhesion to Wet Surfaces
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Hardness Rockwell R
(ASTM D785)
75
Colours Available
Dark Grey
Tensile Shear Adhesion (Wet)
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
174KG/cm² (2,470 psi)
Useable Life
60 mins @ 20°C (68°F)
Pack Sizes
4LTR (1 US Gallon)
1KG (2.2LB) of fully mixed product will give the following coverage rates -
0.685m² at 1mm 7.35ft² at 40mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 70°C (158°F) and intermittent contact with pressured steam up to 120°C (248°F)
Resistant to dry heat in excess of 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
USDA Compliant for incidental food contact