Description

Two-component, dark gray, thixotropic paste, formulated as an EMERGENCY GRADE, high performance, non-rusting, non-corroding machinable metal repair compound designed for rapid repair and rebuilding of worn, damaged, or broken machinery, leaking pipes and tanks within minutes.

 

Benefits

• Super Fast Cure
• Phenomenal Bond strength.
• Controlled Cure Shrinkage.
• High Modulus.
• Non-Rusting.
• Highest Design Strength.
• Ideal For Do It Yourself Programs.
• ASTM Testing Available.
• Easily Machinable.
• No Skinning.
• Indefinite Shelf Life.

 

Physical data

TEMPERATURE RANGE: Wet 93^oC / Dry 203^oC.

SUPER FAST CURE
Will produce emergency repairs within minutes and save you from disasters involving health and safety around the work place. You will also save money by minimizing downtime

IDEAL FOR DO-IT-YOURSELF PROGRAMS BY IN-HOUSE MAINTENANCE PERSONNEL
Save by not using expensive outside contracting. In-house personnel can easily be trained to use with minimum tools.

EXCELLENT RETENTION OF MECHANICAL PROPERTIES AT HIGH TEMPERATURES.
Up to 204^oC in DRY operating conditions and 93^oC in WET operating conditions, IPN SUPERAPID will give you continuous operation. That means, you can plan and execute your own repairs even in challenging "Hi-Temp" fluid-flow situations.

PHENOMENAL BOND STRENGTH: 1 TON PER SQUARE INCH.
This tremendous adhesion capability far exceeds engineering specifications and enables one to do repairs without sacrificing design strength or safety.

CONTROLLED CURE SHRINKAGE: (0.009" / 1")
Not as small as ULTRAMETAL but the smallest in its class in the industry. Although all polymers shrink, IPN scientists were able to "Harness" cure shrinkage. Advanced Polymer knows of competitive materials which shrink a lot more and which are marked "Zero-Shrinkage".
We caution end-users against such misrepresentations. In those repairs where even .001" / 1" cannot be tolerated, we suggest that Advanced Polymer SUPERAPID be built up thicker than needed and then machined or ground down to exact size.

HIGH MODULUS: 400,000 PSI.
Means high resistance to deformation and will not creep under sustained load. This fact, coupled with high Rockwell Hardness turns "Dream-Repairs" into a reality.

EXCELLENT CHEMICAL RESISTANCE
Will withstand corrosion and chemical attack, therefore minimizing downtime.

ADVANCED NON-RUSTING FORMULA FOR PERMANENT REPAIRS.
Gives you "Rust-Free" service and extends the life of your equipment. It means less breakdowns and fewer parts replaced or repaired. It means lasting repairs.

HIGHEST DESIGN STRENGTH
Makes heat welding obsolete and eliminates all the problems associated with welding like warping, pin holing, open flames, etc; replaces bolts and rivets eradication micro-structural imperfections introduced by them. Evens out stresses suppressing fatigue caused by localized stress.

EASILY MACHINABLE
Yes, you can drill, tap, cut, turn, and grind SUPERAPID to make your repair successful. While you can machine it after only 1 hour cure when it is still "Green", we recommend that you wait for 3 hours for best results.

FACTORY-PROPORTIONED PACKAGING.
Easy to mix and apply because BASE:SOLDIFIER ratio of 3:1 by volume is kept during packaging of components so that you don't have to weigh or measure anything during repair. Just mix all contents.

EASY TO USE
No need for outside contracting. In-House personnel can easily be trained to use with minimum tools.

SPLITTABLE UNITS
You can mix full or partial units, so you do not waste any material by mixing more than the repair requires.

INJECTABLE.
IPN SUPERAPID can be injected into metal cavities, voids, molds, cracks, and similar discontinuities, via an Advanced Polymer CRACK INJECTION SYSTEM, using bottom-fill cartridges to produce "Bubble Free" build up of thick sections in a void free manner. IPN SUPERAPID will provide solid support for hollow wearing rings and welded metal plates due to its fluidity. Innovative repairs attempted never before. That is common sense economy with high-tech precision.

INDEFINITE SHELF LIFE
Means you can use the left-over split unit next month, next year, or next decade. This enables you to stock-up and be prepared for those "Unexpected Downtimes".

EXCELLENT REFERENCE AND SUCCESS STORIES
Thousands of innovative IPN repairs have been recorded. You can learn from this unique know-how and application experience and thus save headaches of "Reinventing The Wheel".

LOCAL TECHNICAL SUPPORT BY HIGHLY TRAINED TECHNICAL CONSULTANTS FREE OF CHARGE
We truly believe that the best clients are the most enlightened ones. They use the right products for the right applications the right way. The net result is success on all fronts. Therefore, our application know-how is yours for free. You and Advanced Polymers, this makes a lot of business sense.