Description

A two-component, bright yellow, brushable sprayable, advanced polymer coating, formulated as a high performance, room temperature cure, 100% solids, U.S.D.A. approved, safety system designed for SKID-PROOFING.

IPN NON-SKID SAFETY YELLOW is a new coating material that combines the disciplines of waterproofing and abrasion with modern science and technology of polymers. NON-SKID SAFETY YELLOW is an advanced hybrid which results from polymerizing two reactive resins at room temperature. The need for such materials has always existed since conventional concrete or metal surfaces suffer the drawbacks of:

• Extreme slipperiness due to fluid film on surface, water from rain or washing. industrial processing oils, animal fats, etc.
• Leaks due to rapid deterioration under freeze/thaw conditions.
• Leaks due to fatigue and/or stress cracking materials

 

Typical applications

• Industrial Floors, Loading docks, Ramps.
• Skid-Proofing Steps, Stairs, Walkways, Catwalks.
• Protecting Machinery Bases, Truck beds, Truck/trailer Platforms. Sealing Boat/Ship Decks, Stairs, and Swimming Pools.

All of the above applications can be successfully conducted on substrates other than concrete and metal, such as brick, marble, stone, fiberglass and wood.

 
SUPERIOR "GRIP" PROPERTIES
Will produce lasting "Safety" repairs that will turn "Liability" areas in your plant to "Assets" areas, in ONE afternoon

CHEMICAL BOND BETWEEN LAYERS
Makes "Seamless" coats possible. Moreover, there are no mechanical fracture planes or disbonding to worry about.

100% SOLIDS - NO SOLVENTS
No solvent-entrapment, since it is solvent-free to begin with. That means no blisters, bubbles, holidays or pinholes. One coat application will deposit anywhere from 0.4mm  of "Dried-Thickness". This thickness is only achieved by 4-6 coats of solvent-based coatings with long hours of wait between each two consecutive coatings to allow the solvent to escape into the atmosphere. This may not only create health, safety and fire hazards, but also makes the whole proposition extremely expensive by extending downtime into several days.

PHENOMENAL BOND STRENGTH TO CONCRETE AND METAL
This tremendous adhesion capability far exceeds engineering specifications. Positive bond is also achieved to other substrates such as wood, brick, ceramic and even glass.

NON-POROUS
Water is the single most important source of gradual destruction in concrete. As you know, water expands by freezing and cracks concrete. Water also completes the requirements of an "Electrochemical cell" in steel reinforced concrete causing corrosion. Rust build-up due to corrosion shatters concrete. Since there is no microstructure menaces like pores to retain water, there is no need to worry about FREEZE/THAW damage or rusting in IPN NON-SKID SAFETY YELLOW.

NON-RUSTING
IPN NON-SKID SAFETY YELLOW's non-ferrous composition is the key to its non-rusting/non-corroding nature. And the fact that it is non-porous also helps. The net result is long rust-free service.

WATERPROOF
IPN NON-SKID SAFETY YELLOW is impervious to moisture and de-icing chemicals. This means that direct or indirect damage by the presence of water can be safely disregarded. It also means easy maintenance. NON-SKID SAFETY YELLOW is easily cleaned with detergent and water.

BRIGHT "YELLOW" COLOUR
Attention-Getting colour is easier to notice by people, thus reducing the risk of accidents further. This is especially appreciated in DARK areas or at NIGHT.

FACTORY-PROPORTIONED PACKAGING.
Easy to mix and apply because mix ratios are kept during packaging of components so that you don't have to weigh or measure anything before use. Just mix all contents.

EASY TO USE:
No need for outside contracting. In-House personnel can easily be trained to use with minimum tools.

SPLITTABLE UNITS
You can mix full or partial units, so you do not waste any material by mixing more than the work requires.

INDEFINITE SHELF LIFE.
Means you can use the left-over split unit next month, next year, or next decade. This enables you to stock-up and be prepared for those "Unexpected Downtimes".

EXCELLENT REFERENCE AND SUCCESS STORIES
Thousands of innovative IPN repairs have been recorded. You can learn from this unique know-how and application experience and thus save headaches of "Reinventing The Wheel".

LOCAL TECHNICAL SUPPORT BY HIGHLY TRAINED TECHNICAL CONSULTANTS FREE OF CHARGE
We truly believe that the best clients are the most enlightened ones. They use the right products for the right applications the right way. The net result is success on all fronts. Therefore, our application know-how is yours for free. You and Advanced Polymers, this makes good business sense.