Description

 
IPN AQUACOAT is a high performance, high solids, low VOC, blue or white coating that conforms to National Sanitation Foundation Standard 61 - Drinking Water System Components - Health Effects, which is designed for POTABLE WATER Immersion Service.

 

Typical applications

Potable water tanks, Fresh water tanks, Food and beverage plants, Water and waste treatment plants, Heavy duty structures, Refineries, Power plants, Wash bays, Cooling towers, Fluid flow systems Etc.

FEATURE

BENEFIT

Easy Application	Spray, Roller or Brush
Long Potlife	Comfortable Re-Coat Windows
High Build	Seamless Overlaps
Practical Cures	Ambient Temperature or Forced Heat
Direct Application (No Primers)	To Tanks and Structural Steel
Continuous service	To Cold, Warm , Hot Water Immersions
Fresh / Sea Water	With or Without Turbulent Flow
High Resistance To	Blister Formation, Bacterial Attack, Chemical Attack, Stains/Moisture, Corrosion.
NSF Standard #61 Approved
FDA and AWWA Acceptable
Meets Federal EPA requirements for Composition Of Coatings Used In Potable Water
According To FDA Regulation 175.300, The White Version Is Suitable For Use On Surfaces Intended For Use In The Production, Manufacturing, Packing, Processing, Treating, Transportation, Or Storage Of Dried Food at Ambient Temperatures When Applied As A Continuous Film According To Specification Over Suitable Substrates, And Acts As A Functional Barrier Between The Dry Food And The Substrate
Gloss Of Cured Coating	65 Units (Low Sheen)
Abrasion Resistance (ASTM D4080) (CS-17 Wheel, 1000 Cycles, 1 Kg Taber)	120 mg
Direct Impact Resistance	60 in. lbs.
Dry Heat Resistance	93oC
Wet Heat Resistance	74oC
Elcometer Adhesion	1000 psi.
Moisture Condensation Resistance	No Failure - (No Blistering, No Under film Corrosion or Creepage Observed)
Pencil Hardness	4 H
Salt Fog Resistance (1000 Hours)	No Blistering, No Underfilm Corrosion or Creepage Observed
NSF Certified To ANSI/NSF	For Tank Sizes of 1,000 Gallons And Larger