|
APPLICATION INSTRUCTIONS |
SAFETY
PRECAUTION
Before opening or working with Fluorolast products,
please refer to the MSDS for safety information. |
SURFACE
PREPARATION
Prepare surfaces according to these guidelines. STEEL
SURFACES: Before sandblasting, remove all traces of oil and grease using
a suitable detergent, followed by a clean-water washing. All steel surfaces
should be sandblasted to white metal in accordance with NACE specification
#1. CONCRETE SURFACES: New surfaces must age at least 28 days. All construction
dust and loose contaminants, etc., must be removed. Old surfaces should
be cleaned to remove any surface contaminants such as stains, previous
coatings, etc. A hydroblast or sandblast is highly recommended. OTHER
SURFACES: All materials (rubber, plastic, wood, fabric, etc.) should be
clean and free of surface contaminants.
Contact our Coatings Research laboratory for more information. |
DIRECTIONS
FOR USE
Fluorolast SB is a two-component room temperature-curable
coating. Add the catalyst to the coating and stir for 2-3 minutes. Allow
an additional 10 minutes for a maturation period. Use MIBK or MEK to thin
the coating. Use MEK or Acetone for cleanup. The precise amount of CA-20
accompanies the coating. |
|
top of page |
MULTIPLE
COATS APPLICATION
Apply multiple coats to obtain the total dry film
thickness (DTF) that you desire. Coating should be dry to touch before
applying another coat (approximately 30 minutes). |
CURING MATERIAL
Material will cure at room temperature in approximately
72 hours (70°F, 50% RH). To shorten cure time, please call for information.
|
COATING EXPIRATION
/ STORAGE
The coating may be stored for 2 years at 50°
to 72°F if unopened and uncatalyzed. Do not store near high temperatures
or open flames. |
|
|
Product
|
Method Application
|
Description
|
|
LC-8120 & LCGY-8120
|
Spray, Dip
|
Thin Films, Inks,
Low Build
|
|
LC-8125 & LCGY-8125
|
Spray, Dip, Brush
|
Thin Films, Inks,
Medium Build
|
|
LC-8130 & LCGY-8130
|
Spray, Dip, Brush
|
Medium Films, Medium
Build
|
|
LC-8135 & LCGY-8135
|
Roll, Brush, Squeegee
|
Irregular Surfaces,
Medium Build
|
|
LC-8140 & LCGY-8140
|
Roll, Brush, Squeegee
|
Irregular Surfaces,
High Build
|
|
top of page |
| TECHNICAL DATA
|
| PHYSICAL
PROPERTIES AND TYPICAL VALUE CHART
|
|
Physical Properties
|
LC-
8120
|
LC-
8125
|
LC-
8130
|
LC-
8135
|
LC-
8140
|
LCGY-
8120
|
LCGY-
8125
|
LCGY-
8130
|
LCGY-
8135
|
LCGY-
8140
|
|
Color*
|
Black
|
Black
|
Black
|
Black
|
Black
|
Gray
|
Gray
|
Gray
|
Gray
|
Gray
|
|
Components
|
2
|
2
|
2
|
2
|
2
|
2
|
2
|
2
|
2
|
2
|
|
Viscosity, CPS
|
115-
150
|
350-
450
|
1400-
1600
|
5000-
6000
|
14000-
18000
|
115-
150
|
350-
450
|
1400-
1600
|
5000-
6000
|
14000-
18000
|
|
Solids, Volume %
|
9.79
± .5
|
12.64
± .5
|
15.66
± .5
|
18.92
± .5
|
22.44
± .5
|
8.63
± .5
|
11.20
± .5
|
13.93
± .5
|
16.90
± .5
|
20.15
± .5
|
|
Solids, Weight %
|
20.0
± .5
|
25.0
± .5
|
30.0
± .5
|
35.0
± .5
|
40.0
± .5
|
20.0
± .5
|
25.0
± .5
|
30.0
± .5
|
35.0
± .5
|
40.0
± .5
|
|
DFT Per Coat, Mils
|
1
|
2
|
3
|
4
|
5
|
1
|
2
|
3
|
4
|
5
|
|
Coverage, Ft²/Mil/Gallon
|
157
|
202
|
251
|
303
|
359
|
138
|
179
|
223
|
271
|
323
|
*Additional stock colors
are available.
|
